EasyManua.ls Logo

Alliance Laundry Systems KT075N User Manual

Alliance Laundry Systems KT075N
176 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
www.comlaundry.com
Troubleshooting
Part No. 70422101
October 2009
Drying Tumblers
50 Pound Capacity
75 Pound Capacity
Starting Serial No. 0904004427
Refer to Page 7 for Model Numbers
TMB795C
TMB795C

Table of Contents

Other manuals for Alliance Laundry Systems KT075N

Question and Answer IconNeed help?

Do you have a question about the Alliance Laundry Systems KT075N and is the answer not in the manual?

Alliance Laundry Systems KT075N Specifications

General IconGeneral
BrandAlliance Laundry Systems
ModelKT075N
CategoryDryer
TypeTumble Dryer
Capacity75 lb
Phase3

Summary

Section 3 Troubleshooting

Motor Does Not Start

Troubleshooting steps when the motor fails to start.

Motor Overload Protector Cycles Repeatedly

Diagnosing issues with the motor overload protector cycling frequently.

Motor Runs But Cylinder Does Not Turn

Troubleshooting steps when the motor runs but the cylinder does not rotate.

Motor Does Not Stop

Steps to resolve issues where the motor fails to stop.

Heating Element Does Not Heat or Burner Does Not Ignite

Diagnosing why the heating element or burner is not functioning.

Igniter Does Not Shut Off After Gas Ignition – Gas Burner

Troubleshooting igniter issues on gas burners after ignition.

Heating Element or Burner Shuts Off Prematurely

Steps to take when heating elements or burners shut off unexpectedly.

Heating Element or Burner Repeatedly Cycles Off On High Limit Thermostat

Diagnosing repeated cycling off due to the high limit thermostat.

Heating Element or Burner Does Not Shut-Off

Troubleshooting when heating elements or burners fail to shut off.

Clothes Do Not Dry

Steps to resolve issues related to clothes not drying properly.

Tumbler Overheating

Diagnosing and resolving tumbler overheating problems.

Burners Not Burning Properly — Gas Models

Troubleshooting gas burner issues such as improper burning.

Loading Door Opens During Operation

Steps to take if the loading door opens unexpectedly during operation.

Tumbler Runs But No Steam To Coils — Steam Models

Troubleshooting steam model issues when no steam reaches the coils.

Water In Steam Line — Steam Models

Diagnosing problems related to water in the steam line for steam models.

Door Open Light and Display Flash With Door Closed

Troubleshooting the door open indicator and display flashing with a closed door.

Display Shows “SH” and Signals Sounds

Diagnosing display errors showing 'SH' with audible signals.

Display Shows “OP” and Signal Sounds Three Minutes After Tumbler is Started

Troubleshooting display errors showing 'OP' after the tumbler starts.

Motor Runs, Time on Drying Timer But No Heat

Diagnosing issues where the motor runs but no heat is produced.

No Main Burner Flame, Igniter Does Not Spark

Troubleshooting when there's no main burner flame and the igniter doesn't spark.

Section 5 Micro Display Control (MDC) Troubleshooting

Section 6 NetMaster Troubleshooting – KT075 Models Only

Section 8 On Premise Micro Control (OM) Troubleshooting

Section 9 Hybrid Timer Control Troubleshooting

Section 10 Quantum Control Troubleshooting

Related product manuals