Need help?Do you have a question about the ALLIANCE HWNLX2SP111CW01 and is the answer not in the manual?
General| Brand | Alliance |
|---|---|
| Model | HWNLX2SP111CW01 |
| Category | Washer |
| Loading Type | Front Load |
| Color | White |
| Voltage | 120V |
| Frequency | 60 Hz |
| Amperage | 15 A |
| Control Type | Electronic |
| Height | 43 inches |
| Cycle Options | Normal, Delicate |
| Water Level Options | Low, Medium, High |
| Material | Stainless Steel |
| Warranty | 3 year limited warranty |
Control unit for cycle selection, temp, vend prices, and diagnostics.
Defines key terms and abbreviations used throughout the manual.
Describes how the washer resumes or ends cycles after power interruptions.
Outlines methods for programming and data retrieval via various devices.
Program/read data using external devices like PDAs.
Vending transactions and audit collection via card readers.
Link control to PC for programming and data collection.
Pads used to select the specific washer cycle and cycle modifiers.
Pads used to select water temperature for wash and rinse fills.
LEDs indicating chosen cycle, temperature, and status.
Display for time, price, error messages, and descriptive codes.
Initial display and mode entry upon power application.
How to start cycles and select options before the first fill.
Control indicates cycle progress and handles coin entry.
How opening the lid affects the cycle and display.
Allows owners to program cycles, vend prices, and features.
How to retrieve stored data like coin counts and cycle totals.
Details how to run specific diagnostic tests on the washer.
Accessing programming and diagnostics for coin-operated models.
Accessing programming and diagnostics for card reader models.
Step-by-step instructions to access programming and diagnostic modes.
Overview of programmable parameters like cycle settings and vend pricing.
List of all available options with display codes, defaults, and ranges.
Sets the vend price for a normal/hot wash cycle.
Sets the numerical value for the first coin type used for payment.
Sets the numerical value for the second coin type used for payment.
Configures single or multiple pulses to start the cycle.
Sets the default cycle and temperature displayed in Ready Mode.
Enables/disables OPL mode where no vend price is needed.
Programs when the signal sounds for various events.
Allows enabling or disabling specific errors in the control.
Allows setting the internal clock to the correct time and date.
Sets the day(s) of the week for a special vend.
Programs cycle modifiers like extra wash/rinse time or warm rinse.
Sets the time duration for various steps within each cycle.
Limits machine use to attendants without requiring payment.
Sets duration control stores cycle info during power failures.
Enables/disables feature to quickly advance through cycles.
Enables or disables the manual diagnostics option.
Enables or disables access to the production test cycle.
Details methods to access and view stored audit data.
Explains how to interpret and view retrieved audit information.
Instructions for safely exiting audit data retrieval mode.
Guide to accessing the diagnostic test mode.
Instructions on initiating specific diagnostic tests from the chart.
Procedures for exiting diagnostic tests and returning to previous mode.
Detailed explanations of each available diagnostic test.
Steps to reset the washer control to factory default settings.
Steps to activate rapid advance when machine is in Ready Mode.
Steps to activate rapid advance when a cycle is running.
Instructions for exiting the rapid advance mode.
Resets control to ready mode when a vend price is partially satisfied.
Explains default behavior when power fails and is restored.
Describes how programmed reset times affect cycle continuation.
Enables communication with external devices for programming/data reading.
Allows communication with card reader for vending and data.
Enables communication with a network for programming and data.
To Next Page