To Next PageTo Next PageWhat does it mean when the status lights are flashing on my ALLIANCE TR5003WN?
Status lights may flash or remain on continuously to indicate an error condition. The number of flashes is followed by a pause, and then the flash sequence will repeat.
What does it mean when the WASH and RINSE STATUS lights flash 2 times on my ALLIANCE Washer?
If the WASH and RINSE STATUS lights flash 2 times on your ALLIANCE Washer, it indicates a Fill Error. This code appears if the washer hasn't reached the fill level after 30 minutes during a wash or rinse fill. Make sure the hot and cold water faucets are turned on and that the fill hoses aren't kinked or twisted. Clean the screens in the water mixing valve and the filter screens located at the faucet end of the fill hoses. You can also try unplugging the machine for 15 seconds to clear this code.
What does it mean when the WASH and RINSE STATUS lights are continuously on Drain Error on my ALLIANCE TR5003WN Washer?
If the WASH and RINSE STATUS lights are continuously on with a Drain Error on your ALLIANCE Washer, it indicates that water is still in the washer at the end of the cycle. Check the drain hose and drain receptacle to ensure they are properly installed and not blocked. You can also unplug the machine for 15 seconds to clear this code.
What does it mean when the WASH and RINSE STATUS lights flash 1 time Pressure Sensor Error on my ALLIANCE Washer?
If the WASH and RINSE STATUS lights flash once, indicating a Pressure Sensor Error on your ALLIANCE Washer, the control has detected trouble sensing the water fill level. Unplug the machine and call for service.
What does it mean when the RINSE and LID LOCK STATUS lights flash 3 times Lid Open Error on my ALLIANCE TR5003WN Washer?
If the RINSE and LID LOCK STATUS lights flash 3 times, indicating a Lid Open Error on your ALLIANCE Washer, the control senses that the lid is open during a running cycle. Unplug the machine to clear this code.
General| Capacity | 3.2 cu. ft. |
|---|---|
| Color | White |
| Energy Star Certified | No |
| Wash Cycles | 8 |
| Spin Speed | 700 RPM |
| Voltage | 120 V |
| Type | Top Load |
| Width | 27 inches |
| Depth | 27 inches |
Covers critical warnings about installation, operation, fire, and explosion risks.
Defines DANGER, WARNING, CAUTION, IMPORTANT, and NOTE statements.
Provides critical precautions for safe washer operation and installation.
Details benefits like ownership verification and warranty service.
Covers pre-wash steps like emptying pockets, mending, and sorting.
Guides on how to properly load items into the washtub for optimal results.
Explains Auto Fill and manual water level settings for different load sizes.
Details recommended water temperatures for various fabric types and soil levels.
Provides advice on reducing energy consumption during washing.
Describes various wash cycles like Heavy Duty, Normal Eco, Perm Press, and Delicate.
Explains how to select the correct water level based on load size.
Details the extended wash time and soak period for heavily soiled items.
Explains the meaning of status lights and audio feedback during operation.
Step-by-step guide on loading clothes and starting a wash cycle.
Instructions on how to pause, resume, or cancel a wash cycle.
Outlines the stages, times, and settings for the Normal Eco cycle.
Details stages, times, and settings for specific heavy-duty and delicate cycles.
Explains the stages and settings for the Spin Only cycle.
Lists common washer sounds and their likely causes.
Introduces features like the Bleach Dispenser and Fabric Softener Dispenser.
Provides instructions for cleaning and using the fabric softener dispenser.
Addresses common clothing issues like dinginess, yellowing, tearing, lint, and wrinkling.
Instructions for protecting the washer in cold conditions and winterizing it.
Guidelines for cleaning the control panel, cabinet, and interior of the washer.
Covers replacing hoses and cleaning filter screens for optimal performance.
Advice on preparing the washer for periods of non-operation to prevent damage.
Outlines a schedule for checking hoses, lid switch, leveling, and tub cleaning.
Instructions on how to reinstall shipping brace and plug when moving the washer.
Addresses common problems related to the washer not filling or starting.
Solutions for issues like the washer not agitating or spinning correctly.
Explains normal pauses and how to address errors indicated by status lights.
Troubleshooting steps for problems with draining and water leaks.
Addresses causes and solutions for unusual noise, wet loads, and incorrect water temperatures.
Guidance on managing excessive suds and interpreting error codes.
Details specific error codes indicated by flashing status lights.
Information on obtaining warranty repairs and locating service providers.
Provides phone numbers, website, and mailing address for customer support.
