Allied Telesis AT-2400T - Page 47

Network Adapter Installation Guide
47
e. In the Specify a Location field, enter the drive letter and path to
the adapter driver. The driver locations on the CardAssistant CD
are:
For example, if you are installing an adapter driver for an
AT-2500 Series adapter and the CD is mapped to drive D, you
would enter: D:\drivers\at2500
The Found New Hardware Wizard starts to search for the
appropriate adapter driver file. After an adapter driver has been
found, the window shown in Figure 25 is displayed.
Figure 25 Found New Hardware Wizard Window (4 of 5)
f. Proceed to Step 9.
Adapter Card Driver Location
AT-2400T, AT-2400BT \drivers\at2400
AT-2450FXT \drivers\at24_27
AT-2500, AT-2500TX,
AT-2501
\drivers\at2500
AT-2700TX, AT-2700FX,
AT-2700FTX, AT-2745FX
\drivers\at24_27
AT-2701 \drivers\at2701
AT-2915T, AT-2930 \drivers\at29xx