Network Adapter Card Installation Guide
99
3. Select Device Manager.
The Device Manager window is shown in Figure 58.
Figure 58. Device Manager Window
4. Expand Network adapters by either double-clicking on it or by clicking
once on the expansion box next to it.
The selection expands to display the network adapter cards installed in
the system. An example is shown here.
Note
The branch under Network Adapters will include VLANs if VIDs were
added to the adapter with the AT-MUX protocol. The VLANs are
labelled “Allied Telesyn VLAN-Tagging miniport Driver.” In the next
step you must select the network adapter card and not a VLAN. The
adapter card selection has the adapter’s model number in the label.
To Next Page
Loading...
Need help?
General
