EasyManua.ls Logo

Allied Telesis AT-8000GS/24 - User Manual

Allied Telesis AT-8000GS/24
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
613-000974 Rev. B
AT-8000GS Series
Stackable Gigabit
Ethernet Switches
AT-8000GS/24
AT-8000GS/POE
AT-8000GS/48
Installation Guide

Table of Contents

Other manuals for Allied Telesis AT-8000GS/24

Question and Answer IconNeed help?

Do you have a question about the Allied Telesis AT-8000GS/24 and is the answer not in the manual?

Allied Telesis AT-8000GS/24 Specifications

General IconGeneral
Ports24 x 10/100/1000Base-T
Switching Capacity48 Gbps
Forwarding Rate35.7 Mpps
Weight3.5 kg
Power SupplyAC 100-240V, 50/60Hz
Operating Temperature0°C to 40°C
Uplink Ports4 x SFP
Jumbo Frame Support9, 216 bytes
Dimensions440 x 44 x 44 mm
ManagementWeb-based, CLI, SNMP
Power Consumption30W (maximum)
Storage Temperature-40°C to 70°C
Humidity10% to 90% (non-condensing)
MAC Address Table Size16, 000 entries

Summary

Preface

Safety Symbols Used in this Document

Explains the meaning of various safety symbols used in the document.

Where to Find Web-based Guides

Guides users to find online product documentation on the company website.

Contacting Allied Telesis

Provides contact details for technical support, sales, and warranty information.

Chapter 1: Overview

AT-8000 GS Switch Series Features

Lists the key features of the AT-8000GS switch series.

IEEE Standards

Details the IEEE standards supported by the switches.

Model Descriptions

Describes the different models in the AT-8000GS series.

Port Descriptions

Explains the various ports available on the switches.

LED Definitions

Provides information on the meaning of different LEDs on the switch.

Chapter 2: Installation

Reviewing Safety Precautions

Details safety precautions for installation.

Preparing for Installation

Explains site preparation steps before installation.

Installing the Device

Covers the physical installation process for the device.

Connecting the Device

Describes how to connect the device to power and a terminal.

Chapter 3: Stacking

Stacking Overview

Introduces the concept and benefits of switch stacking.

Stacking Topology Types

Explains Ring and Chain topologies for stacking.

Stacking Members and Unit ID Management

Details unit IDs and procedures for managing stack members.

Configuring Stacking

Step-by-step guide to configure stacking.

Chapter 4: Initial Configuration

Configuration Overview

Provides an overview of initial configuration steps.

Static IP Address and Subnet Mask Configuration

Details configuring IP address, subnet mask, and default gateway.

User Name and Privilege Level Setup

Explains how to set up user names and privilege levels for management.

Chapter 5: Troubleshooting

Device Operation and Connectivity Issues

Offers solutions for devices not functioning and connectivity problems.

Password Recovery Guidance

Offers guidance if the user password is lost.

Appendix A: Technical Specifications

Physical, Environmental, and Weight Specifications

Covers physical dimensions, weight, and environmental operating conditions.

Power Specifications and Certifications

Details power requirements, consumption, and product certifications.

Port Interface and Pinout Information

Information on physical interfaces, ports, and connector pinouts.

Related product manuals