
Do you have a question about the Allied Telesis AT-GS950/16 and is the answer not in the manual?
| Ports | 16 x 10/100/1000Base-T |
|---|---|
| Switching Capacity | 32 Gbps |
| Forwarding Rate | 23.8 Mpps |
| MAC Address Table Size | 8K entries |
| Jumbo Frames | 9KB |
| Power Supply | 100-240V AC, 50/60Hz |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -40°C to 70°C |
| Humidity | 10% to 90% (non-condensing) |
Details how to manually configure the switch's IP address, subnet mask, and default gateway.
Covers creating, modifying, and deleting user accounts and passwords for web interface access.
Describes activating and deactivating the DHCP client for automatic IPv4 and IPv6 address acquisition.
Explains how to view and configure parameter settings for individual or all switch ports simultaneously.
Outlines the procedure to create a static port trunk by selecting ports and configuring trunk mode.
Outlines the procedure to configure port mirroring, selecting source ports and mirroring ports for traffic monitoring.
Details how to set static unicast MAC addresses for ports, associating them with VLANs and specifying port members.
Details how to set IGMP snooping, querier status, age-out timers, and query intervals for multicast group management.
Outlines creating and deleting tagged VLANs, assigning VLAN IDs, names, and port memberships.
Outlines creating and deleting port-based VLANs, assigning VLAN IDs, names, and port memberships.
Allows creating, modifying, and deleting IPv4/IPv6 policies for filtering and policing Ethernet traffic.
Details configuring RMON port statistics for a specific port to remotely view individual port statistics.
Outlines the procedure to configure a voice VLAN, including VLAN ID, aging time, CoS, and auto-detection settings.
Details configuring port-based access control, including NAS ID, port access control status, and authentication methods.
Details configuring the TACACS+ client by entering the server's IP address, port, and shared secret.
Details setting the MAC address in the Destination MAC Filter to filter packets to specified devices.
Details configuring DHCP Snooping trusted and untrusted interfaces on the switch ports.
Allows displaying specified traffic statistics over all ports with customizable types, colors, and refresh intervals.
Displays discard and error counts for a specified port, providing insights into port errors.
Allows viewing historical statistics for selected ports over extended periods, identifying trends.
Details upgrading the AT-S114 Management Software firmware using HTTP on an Internet server.
Outlines upgrading the AT-S114 Management Software firmware using TFTP on a TFTP server.
Describes downloading or uploading configuration files to/from the switch via HTTP using a web browser.
Details downloading or uploading configuration files to/from the switch via TFTP using a TFTP server.
Outlines the procedure to reboot the AT-GS950/16 switch using the normal reboot function in the management software.
Details returning all management software parameters to factory default values, including VLAN resets.











