AT-GS950/16 Web Interface User Guide
293
Figure 117. Dial-In User Page
3. In the User Name field, type a name for the user.
4. In the Password field, type a password for the user.
5. In the Dynamic VLAN field, enter the VID of the VLAN which you will
allow the user to access. If you enter 0, this field will be ignored.
6. Click the Add button.
The Dial-in User page is refreshed. See Figure 118.
Figure 118. Dial-In User Page Example
7. To permanently save these settings in the configuration file, select
Save Settings to Flash from the main menu to permanently save your
changes.
To Next Page
Loading...
