99
Chapter 6
Static Port Trunking
This chapter contains a description of port trunking and the procedures for
creating, modifying, and deleting a static port trunk. The following topics
are discussed:
“Overview” on page 100
“Create a Port Trunk” on page 103
“Modify a Port Trunk” on page 105
“Disable a Port Trunk” on page 107
For information about Link Aggregation Control Protocol (LACP) port
trunking, see Chapter 7, “LACP Port Trunks” on page 109.
To permanently save your new settings or any changes to the
configuration file, select Save Settings to Flash from the main
menu on the left side of the page.
To Next Page
Loading...
