Need help?Do you have a question about the Allied Telesis AT-8000S Series and is the answer not in the manual?
General| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
|---|---|
| Storage Humidity | 5% to 95% non-condensing |
| Switching Capacity | 104 Gbps |
| Forwarding Rate | 77.4 Mpps |
| VLANs | 4, 094 |
| Layer 3 Features | Static routing, RIP v1/v2 |
| Management | Web-based |
| Operating Humidity | 10% to 90% non-condensing |
Instructions on how to launch and log into the Web Browser Interface.
Procedure to reset the device to its default settings.
Configures device name, IP address, subnet mask, gateway, and admin details.
Configuring the device's local and SNTP time settings.
Securing device management access, users, and passwords.
Managing port security and 802.1x access.
Configuring port parameters like speed, duplex, and status.
Combining multiple ports into a single logical link (LAG).
Managing static and dynamic MAC address tables.
Creating and configuring Virtual LANs.
Setting system log severity levels and parameters.
Configuring the standard Spanning Tree Protocol.
Configuring RSTP for faster STP convergence.
Configuring MSTP for load balancing across STP instances.
Configuring IGMP Snooping for multicast traffic analysis.
Globally enabling and configuring SNMP on the device.
Enabling PoE and setting the total power threshold.
Configuring individual PoE port settings.
Defining bandwidth settings for egress interfaces.
Restoring the device to factory default configuration settings.
Configuring and viewing RMON history, events, and alarms.
To Next Page
