Configuring System Time
Configuring Daylight Saving Time
Page 25
– Time — The time at which DST begins every year. The field format is Hour:Minute. For example: 02:10.
• To — The time that DST ends each year. In the example, DST ends locally every first Sunday in October at
midnight. The possible field values are:
– Day — The day of the week at which DST ends every year. The possible field range is Sunday-Saturday.
– Week — The week within the month at which DST ends every year. The possible field range is 1-5.
– Month — The month of the year in which DST ends every year. The possible field range is Jan.-Dec.
– Time — The time at which DST ends every year. The field format is HH:MM. For example: 05:30.
2. To configure the device to automatically switch to DST, select Daylight Savings and select either USA,
European, or Other. If you select Other, you must define its From and To fields. To configure DST parameters
that will recur every year, select Recurring and define its From and To fields.
3. Click Apply. The DST settings are saved, and the device is updated.
4. Click Save Config on the menu to save the changes permanently.
To Next Page
Loading...
Need help?
General
