Allied Telesis AT-8000S Series User Manual

Viewing Statistics
Managing RMON Statistics
Page 155
Managing RMON Statistics
This section contains the following topics:
• Viewing RMON Statistics
• Configuring RMON History
• Configuring RMON Events
• Defining RMON Alarms
Viewing RMON Statistics
The RMON Statistics Page contains fields for viewing information about device utilization and errors that occurred
on the device. The RMON Statistics Page contains statistics for both received and transmitted packets.
To view RMON statistics:
1. Click Statistics > RMON Statistics. The RMON Statistics Page opens:
Figure 99: RMON Statistics Page
The RMON Statistics Page contains the following fields:
• Interface — Indicates the device for which statistics are displayed. The possible field values are:
– Port of Unit— Defines the specific port for which RMON statistics are displayed.
– Trunk — Defines the specific LAG for which RMON statistics are displayed.
• Refresh Rate — Defines the frequency of the interface statistics updates. The possible field values are:
– 15 Sec — Indicates that the RMON statistics are refreshed every 15 seconds.

Allied Telesis AT-8000S Series Specifications

General

Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Humidity	5% to 95% non-condensing
Switching Capacity	104 Gbps
Forwarding Rate	77.4 Mpps
VLANs	4, 094
Layer 3 Features	Static routing, RIP v1/v2
Management	Web-based
Operating Humidity	10% to 90% non-condensing