Allied Telesis AT-8000S Series User Manual

Page 6
Allied Telesis AT-8000S Switch
Web Browser Interface User’s Guide
Preface
This guide contains instructions on how to configure an AT-8000S Series Layer 2+ Fast Ethernet Switch using the
interface in the Embedded Management System (EWS).
The Embedded Management System enables configuring, monitoring, and troubleshooting of network devices
remotely via a web browser. The web pages are easy-to-use and easy-to-navigate.
This preface provides an overview of the Web Browser Interface User’s Guide, and includes the following
sections:
• Web Browser Interface User’s Guide Overview
• Intended Audience

Allied Telesis AT-8000S Series Specifications

General

Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Humidity	5% to 95% non-condensing
Switching Capacity	104 Gbps
Forwarding Rate	77.4 Mpps
VLANs	4, 094
Layer 3 Features	Static routing, RIP v1/v2
Management	Web-based
Operating Humidity	10% to 90% non-condensing