Allied Telesis AT-8000S Series User Manual

Page 122
Allied Telesis AT-8000S Switch
Web Browser Interface User’s Guide
Configuring SNMP Notifications
The SMNMP SNMP Notify Page enables the configuration of notification recipients. the page contains information
for defining filters that determine whether traps are sent to specific users, and the trap type sent. SNMP
notification filters provide the following services:
• Identifying Management Trap Targets
• Trap Filtering
• Selecting Trap Generation Parameters
• Providing Access Control Checks
Defining Notification Recipients
To define SNMP notification receivers:
To configure SNMP notification recipients:
1. Click SNMP > Notify. The SNMP Notify Page opens:
Figure 79: SNMP Notify Page

Allied Telesis AT-8000S Series Specifications

General

Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Humidity	5% to 95% non-condensing
Switching Capacity	104 Gbps
Forwarding Rate	77.4 Mpps
VLANs	4, 094
Layer 3 Features	Static routing, RIP v1/v2
Management	Web-based
Operating Humidity	10% to 90% non-condensing