Allied Telesis AT-8000S Series User Manual

Viewing Statistics
Viewing Interface Statistics
Page 153
Viewing Etherlike Statistics
The Etherlike Statistics Page displays interface statistics.
To view Etherlike statistics:
1. Click Statistics > Etherlike. The Etherlike Statistics Page page opens:
Figure 98: Etherlike Statistics Page
The Etherlike Statistics Page contains the following fields:
• Interface — Indicates the device for which statistics are displayed. The possible field values are:
– Port of Unit— Defines the specific port for which Etherlike statistics are displayed.
– Trunk — Defines the specific LAG for which Etherlike statistics are displayed.
• Refresh Rate — Defines the frequency of the interface statistics updates. The possible field values are:
– 15 Sec — Indicates that the Etherlike statistics are refreshed every 15 seconds.
– 30 Sec — Indicates that the Etherlike statistics are refreshed every 30 seconds.
– 60 Sec — Indicates that the Etherlike statistics are refreshed every 60 seconds.
– No Refresh — Indicates that the Etherlike statistics are not refreshed.

Allied Telesis AT-8000S Series Specifications

General

Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Humidity	5% to 95% non-condensing
Switching Capacity	104 Gbps
Forwarding Rate	77.4 Mpps
VLANs	4, 094
Layer 3 Features	Static routing, RIP v1/v2
Management	Web-based
Operating Humidity	10% to 90% non-condensing