Configuring SNMP
Defining SNMP Communities
Page 115
– Read Write — Management access is read-write and changes can be made to the device configuration,
but not to the community.
– SNMP Admin — User has access to all device configuration options, as well as permissions to modify
the community.
• View Name — Contains a list of user-defined SNMP views.
SNMP Communities Advanced Table
The SNMP Communities Advanced Table contains the following fields:
• Management Station — Displays the management station IP address for which the advanced SNMP
community is defined.
• Community String — Defines the password used to authenticate the management station to the device.
• Group Name — Defines advanced SNMP community group names.
To modify SNMP community settings:
1. Select an SNMP community entry in the Basic table or in the Advanced Table.
2. Click Modify. The SNMP Community Settings Page opens:
Figure 71: SNMP Community Settings Page
3. Define the SNMP Management, Community String, Access Mode, Group Name and Basic or Advanced
fields.
4. Click Apply. The SNMP community settings are modified, and the device is updated.
To Next Page
Loading...
Need help?
General
