Allied Telesis AT-8000S Series - RS-232 Port Settings; Port Defaults; Configuration Defaults; Security Defaults

System Defaults
RS-232 Port Settings
Page 181
RS-232 Port Settings
The following table contains the RS-232 port setting defaults:
Port Defaults
The following are the port defaults:
Configuration Defaults
The following are the initial device configuration defaults:
Security Defaults
The following are the system security defaults:
Data Bits
8
Stop Bits
1
Parity
None
Flow Control
None
Baud Rate
115,200 bps
Head of Line
Blocking
Enabled
Back Pressure
Disabled
Default User Name
manager
Default Password
friend
System Name
None
Comments
None
BootP
Enabled
DHCP
Disable