EasyManuals Logo

Allied Telesis AT-8000S Series User Manual

Allied Telesis AT-8000S Series
188 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #157 background imageLoading...
Page #157 background image
Page 156
Allied Telesis AT-8000S Switch
Web Browser Interface User’s Guide
30 Sec — Indicates that the RMON statistics are refreshed every 30 seconds.
60 Sec — Indicates that the RMON statistics are refreshed every 60 seconds.
No Refresh—Indicates that the RMON statistics are not refreshed.
Received Bytes (Octets) — Displays the number of octets received on the interface since the device was
last refreshed. This number includes bad packets and FCS octets, but excludes framing bits.
Received Packets — Displays the number of packets received on the interface, including bad packets,
Multicast and broadcast packets, since the device was last refreshed.
Broadcast Packets Received — Displays the number of good broadcast packets received on the interface
since the device was last refreshed. This number does not include Multicast packets.
Multicast Packets Received — Displays the number of good Multicast packets received on the interface
since the device was last refreshed.
CRC & Align Errors — Displays the number of CRC and Align errors that have occurred on the interface
since the device was last refreshed.
Undersize Packets — Displays the number of undersized packets (less than 64 octets) received on the
interface since the device was last refreshed.
Oversize Packets — Displays the number of oversized packets (over 1518 octets) received on the interface
since the device was last refreshed.
Fragments — Displays the number of fragments (packets with less than 64 octets, excluding framing bits, but
including FCS octets) received on the interface since the device was last refreshed.
Jabbers Displays the
total number of received packets that were longer than 1518 octets. This number
excludes frame bits, but includes FCS octets that had either a bad Frame Check Sequence (FCS) with an
integral number of octets (FCS Error) or a bad FCS with a non-integral octet (Alignment Error) number. The field
range to detect jabbers is between 20 ms and 150 ms.
Collisions — Displays the number of collisions received on the interface since the device was last refreshed.
Frames of xx Bytes — Displays the number of xx-byte frames received on the interface since the device
was last refreshed.
2. Select the Interface and the Refresh Rate. The selected interfaces RMON statistics are displayed.

Table of Contents

Other manuals for Allied Telesis AT-8000S Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Allied Telesis AT-8000S Series and is the answer not in the manual?

Allied Telesis AT-8000S Series Specifications

General IconGeneral
Operating Temperature0°C to 40°C (32°F to 104°F)
Storage Humidity5% to 95% non-condensing
Switching Capacity104 Gbps
Forwarding Rate77.4 Mpps
VLANs4, 094
Layer 3 FeaturesStatic routing, RIP v1/v2
ManagementWeb-based
Operating Humidity10% to 90% non-condensing

Related product manuals