Allied Telesis AT-8000S Series User Manual

Page 44
Allied Telesis AT-8000S Switch
Web Browser Interface User’s Guide
2. Click Create. The Add Local User Page opens:
Figure 25: Add Local User Page
In addition to the fields in the Local Users Page, the Add Local User Page contains the following fields:
• Password — Defines the local user password. Local user passwords can contain up to 159 characters.
• Confirm Password — Verifies the password.
3. Define the fields.
4. Click Apply. The user is added to the Local Users table and the device is updated.
To modify local users:
1. Click Mgmt. Security > Local Users. The Local Users Page opens.
2. Click Modify. The Local User Configuration Page opens:
Figure 26: Local User Configuration Page
3. Define the User Name, Access Level, Password, and Confirm Password fields.
4. Click Apply. The local user settings are defined, and the device is updated.

Allied Telesis AT-8000S Series Specifications

General

Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Humidity	5% to 95% non-condensing
Switching Capacity	104 Gbps
Forwarding Rate	77.4 Mpps
VLANs	4, 094
Layer 3 Features	Static routing, RIP v1/v2
Management	Web-based
Operating Humidity	10% to 90% non-condensing