Allied Telesis AT-8000S Series - Defining Multicast Forward All Settings

Page 106
Allied Telesis AT-8000S Switch
Web Browser Interface User’s Guide
• Interface Status — Displays the current interface status.
2. Check the Enable Bridge Multicast Filtering checkbox.
3. Click Create. The Add Multicast Group Page opens:
Figure 65: Add Multicast Group Page
4. Select the VLAN ID.
5. Enter the Bridge Multicast MAC Address and the Bridge Multicast IP Address.
6. Click Apply. The new Multicast group is saved and the device is updated.
To modify a multicast group:
Click Modify. The Modify Multicast Group Page opens:
Figure 66: Modify Multicast Group Page
7. Define the fields.
8. Click Apply. The Multicast Group is saved and the device is updated.