AT-GS950/16 Web Interface User Guide
169
Figure 59. AT-GS950/16 Modify VLAN Page
5. You cannot modify the VLAN ID on this web page. If you want to delete
the VLAN ID, go to “Delete a Tagged VLAN” on page 170 for more
information.
6. To change the VLAN Name, type a new VLAN Name in the VLAN
Name field.
For more information about this field, refer to “VLAN Name” on
page 159.
7. To allow management access on this VLAN, select one of the following
choices from the pull-down menu:
Enable: This parameter enables Management VLAN on this
VLAN.
If you Disable the Management VLAN on a newly assigned VLAN,
and you are connected to a Member port, you may lose your
connection to the AT-S114 Management software. To restore the
connection, change the connection of your PC to an appropriate port
or re-boot the switch.
Disable - This parameter disables Management VLAN on this
VLAN. If you change this parameter from Enable to Disable, the
Management VLAN will be enabled on the DefaultVLAN
automatically.
To Next Page
Loading...
Need help?
General
