Need help?Do you have a question about the Allied Telesis AT-8026T and is the answer not in the manual?
General| Brand | Allied Telesis |
|---|---|
| Model | AT-8026T |
| Category | Switch |
| Language | English |
Details RFI emission standards and compliance for the product.
Lists immunity standards that the product complies with.
Outlines electrical safety standards and certifications for the equipment.
Covers laser safety standards and warnings for fiber optic ports.
Compliance with FCC rules regarding radiated energy in commercial environments.
Compliance with Canadian Interference-Causing Equipment Regulations.
Explains the structure and content of the installation guide.
Lists common features of AT-8000 Series Switches.
Details the AT-8012M switch, its ports, and expansion slot.
Details the AT-8012M-QS switch, its ports, and expansion slot.
Details the AT-8016F/xx switches, their fiber optic ports, and expansion slots.
Details the AT-8024 switch and its 24 10/100Base-TX ports.
Details the AT-8024GB switch with GBIC expansion slots.
Details the AT-8024M switch with two module expansion slots.
Details the AT-8026FC switch with fiber optic ports.
Details the AT-8026T switch with Gigabit uplink ports.
Details the AT-8088/xx switches with mixed port configurations.
Details specifications for 100Base-FX fiber optic ports, including connectors and distance.
Details specifications for 10/100Base-TX twisted pair ports, including connectors and speed.
Details specifications for 10/100/1000Base-T ports, including connectors and speed.
Describes GBIC expansion slots for adding 1000 Mbps fiber optic ports.
Describes expansion slots for adding 100/1000Base fiber optic and twisted pair ports.
Explains the function of twisted pair port LEDs and the mode select button.
Explains the function of fiber optic port LEDs.
Explains the function of the system LEDs on the switch.
Describes the RS-232 terminal port for local management.
Details the function and usage of the reset button.
Describes the RPS connector for connecting a redundant power supply.
Describes the AC power connector for powering the switch.
Describes the DC power connector for models with DC input.
Explains fundamental concepts like MAC address tables and duplex modes.
Illustrates common network topologies like workgroup and backbone setups.
Provides essential safety warnings and guidelines before installation.
Offers requirements and considerations for choosing an installation location.
Covers cabling specifications and planning for twisted pair and fiber optic ports.
Outlines the procedure for safely unpacking the switch and checking components.
Provides step-by-step instructions for mounting the switch in a standard 19-inch rack.
Guides the installation of optional GBIC modules into AT-8024GB switches.
Details how to install expansion or stacking modules into compatible switches.
Explains the installation of the AT-RPS3004 redundant power supply unit.
Covers connecting data cables and applying power to the switch.
Provides instructions for wiring DC powered switches.
Guides users on establishing a local management session via the RS-232 port.
Instructs users to register their product using the warranty card.
Guides on troubleshooting power issues by checking LEDs and power connections.
Helps diagnose and resolve link and connectivity problems for port types.
Explains the meaning of the FAULT LED and troubleshooting steps for solid ON state.
Provides steps to troubleshoot issues establishing a local management session.
Lists dimensions and weight for various AT-8000 series models.
Details operating and storage temperature, humidity, and altitude ranges.
Lists maximum power consumption and input voltage requirements.
Outlines safety standards, EMI, and immunity certifications.
Lists IEEE and RFC standards supported by the switches.
Lists supported SNMP MIBs and enterprise MIBs.
Details pinout signals for RJ-45 connectors in MDI and MDI-X configurations.
Lists pin signals for the RS-232 terminal port.
Details pin definitions for the 16-pin RPS Molex connector.
Describes the MT-RJ connector used for fiber optic connections.
Describes the SC type connector used for fiber optic connections.
Describes the ST type connector used for fiber optic connections.
Describes the HSSDC connector used for stacking kits.
Provides detailed specifications for AT-8016F/xx, AT-8026FC, and AT-8088/xx fiber optic ports.
To Next Page