Need help?Do you have a question about the Allied Telesis AT-8648T/2SP and is the answer not in the manual?
General| Model | AT-8648T/2SP |
|---|---|
| Ports | 48 x 10/100/1000Base-T |
| Power over Ethernet (PoE) | No |
| Jumbo Frame Support | Up to 9KB |
| Type | Managed |
| Product Type | Ethernet Switch |
| Uplink Ports | 2 x SFP |
| VLANs | 4094 |
| Jumbo Frames | Supported |
| Quality of Service (QoS) | Supported |
| Management | Web-based, SNMP |
| Security Features | 802.1x, RADIUS, TACACS+ |
| Power Supply | AC 100-240V, 50/60Hz |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -25°C to 70°C |
| Humidity | 5% to 90% (non-condensing) |
Lists the items included with each switch shipment.
Outlines initial steps and checks before starting the installation process.
Step-by-step guide for installing the switch and optional modules.
Covers installing expansion modules, placing the switch, rack mounting, and SFPs.
Verifying voltage, applying power, and connecting data cables.
Checking power LEDs and ensuring data cable security.
Guide to configuring the switch using the Command Line Interface.
Steps to log in and change the default password for CLI access.
Configuring online help, switch settings, and saving the configuration via CLI.
Describes how to connect and configure the switch via its Graphical User Interface.
Steps to prepare a PC and connect to the switch for GUI configuration.
Connecting PC, accessing CLI, enabling IP, and assigning VLAN 1 IP address.
Saving config, browser settings, accessing IP, and GUI login procedures.
Details the FAULT, MASTER, RPS, and PWR system LEDs.
Explains the LINK and Mode LEDs for the AT-8624T/2M model.
Details the L/A Status, Mode, D/C Mode, and PoE Mode LEDs for the AT-8624PoE.
Explains the LINK, Mode LEDs (COL, SPD, FDX, ACT) for the AT-8648T/2SP.
Describes LEDs for SFP and 10/100/1000Base-T ports on the AT-8648T/2SP.
Information on How-To Notes, MIBs, Visio stencils, and worldwide support contacts.
Details FCC and Canadian communications compliance for the products.
Warnings related to laser product classification and general safety.
Critical warnings and notices regarding electric shock hazards, earthing, and AC overloading.
Guidelines on operating temperature, ventilation, and mechanical loading.
Precautions for battery replacement and notes on no user-serviceable parts.
Requirements for installation compliance, qualified personnel, and model-specific warnings.
Identifies the issuing company and declares product conformity with directives.
Name, position, date, and place of issue for the declaration signatory.
To Next Page