Installation Guide for AT-AR2010V Router
25
Figure 7. USB LED
The LED is described in Table 3.
ETH1 Port LEDs The ETH1 port has two LEDs that display link, activity, duplex and collision
information. The LEDs are shown in Figure 8.
Figure 8. ETH1 Port LEDs
Table 3. USB LED
LED State Description
USB Off
No USB memory device is attached.
Steady
Yellow
USB memory device is experiencing
failure.
Steady
Green
USB memory device is mounted correctly.
AR2010V
12
ETH
CONSOLE
1000 LINK
ACT
100 LINK
ACT
FDX
HDX
COL
FAULT
PWR
FNC1
FNC2
READY
FAULT
RESET
DC 12-24V
ETH1 L/A LED
ETH1 D/C LED
To Next Page
Loading...
