Allied Telesis x510 Series User Manual

15
Chapter 1
Overview
This chapter contains the following sections:
 “Features” on page 16
 “Front and Back Panels” on page 19
 “Management Panel” on page 22
 “10/100/1000Base-T Twisted Pair Ports” on page 23
 “Power Over Ethernet” on page 25
 “SFP+ Slots” on page 30
 “Stacking SFP+ Slots” on page 31
 “eco-friendly Button” on page 32
 “LEDs” on page 33
 “USB Port” on page 41
 “Console Port” on page 42
 “Power Supplies” on page 43
Note
This guide explains how to install the switches as stand-alone units.
For instructions on how to install them in a stack configuration with
Virtual Chassis Stacking (VCStack
™), refer to the x510 Series
Installation Guide for Virtual Chassis Stacking.

Allied Telesis x510 Series Specifications

General

Series	x510 Series
Category	Switch
Operating Temperature	0°C to 50°C (32°F to 122°F)
MAC Address Table Size	16K entries
VLANs	4094
Jumbo Frames	9KB
Power Supply	Internal power supply, 100-240V AC, 50/60Hz
Stacking	Up to 8 units
Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
Management	Web-based, CLI, SNMP
Security Features	Access Control Lists (ACLs), 802.1X authentication, port security
Weight	Varies by model
Ports	Varies by model (e.g., 24, 48)
Dimensions (W x D x H)	440 x 260 x 44 mm (x510-52GP), 440 x 260 x 44 mm (x510-28GP)