Allied Telesis x510 Series - Features; SFP Slots

Chapter 1: Overview
16
Features
Here are the switches and their features:
x510 Models Here are the x510 Series switches:
 AT-x510-28GTX
 AT-x510-28GPX
 AT-x510-28GPX
 AT-x510-52GTX
 AT-x510-52GPX
10/100/1000
Mbps Twisted
Pair Ports
Here are the basic features of the 10/100/1000 Mbps twisted pair ports:
 24 or 48 ports per switch
 10Base-T, 100Base-TX, and 1000Base-T compliant
 IEEE 802.3u Auto-Negotiation compliant
 Auto-MDI/MDIX
 100 meters (328 feet) maximum operating distance
 IEEE 802.3x flow control in 10/100Base-TX full-duplex mode
 IEEE 802.3x backpressure in 10/100Base-TX half-duplex mode
 IEEE 802.3ab 1000Base-T
 Jumbo frames up to 13KB
 RJ-45 connectors
Power Over
Ethernet
Here are the basic features of Power over Ethernet (PoE) on the twisted
pair ports on the AT-x510-28GPX and AT-x510-52GPX Switches:
 Supported on ports 1 to 24 on the AT-x510-28GPX Switch and
ports 1 to 48 on the AT-x510-52GPX Switch
 Supports PoE (15.4 watts maximum) and PoE+ (30 watts
maximum) powered devices
 Supports powered device classes 0 to 4
 Maximum power budget of 370 watts
 Port prioritization
 Mode A wiring
SFP Slots Here are the basic features of the SFP slots on the AT-x510-28GSX
Switch:
 Supports 100Base-FX and 1000Base-SX/LX SFP transceivers