Allied Telesis x510 Series User Manual

Chapter 1: Overview
18
LEDs Here are the port LEDs:
 Link/activity and duplex mode LEDs for the twisted pair ports on
non-PoE switches
 Link/activity and PoE status LEDs for the twisted pair ports on PoE
switches
 Link/activity LEDs for SFP and SFP+ slots
 Stack ID number LED
 eco-friendly button turns off the LEDs to conserve electricity
Installation
Options
Here are the installation options for the switches:
 19-inch equipment rack
 Desk or tabletop
MAC Address
Table
Here are the basic features of the MAC address tables of the switches:
 Storage capacity of 16,000 dynamic MAC address entries
 Storage capacity of 256 static MAC address entries
 Automatic learning and aging
Management
Software and
Interfaces
Here are the management software and interfaces:
 AlliedWare Plus Management Software
 Command line interface
 Web browser interface
Management
Methods
Here are the methods for managing the switches:
 Local management through the Console port
 Remote Telnet and Secure Shell management
 Remote HTTP and HTTPS web browser management
 SNMPv1, v2c, and v3

Allied Telesis x510 Series Specifications

General

Series	x510 Series
Category	Switch
Operating Temperature	0°C to 50°C (32°F to 122°F)
MAC Address Table Size	16K entries
VLANs	4094
Jumbo Frames	9KB
Power Supply	Internal power supply, 100-240V AC, 50/60Hz
Stacking	Up to 8 units
Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
Management	Web-based, CLI, SNMP
Security Features	Access Control Lists (ACLs), 802.1X authentication, port security
Weight	Varies by model
Ports	Varies by model (e.g., 24, 48)
Dimensions (W x D x H)	440 x 260 x 44 mm (x510-52GP), 440 x 260 x 44 mm (x510-28GP)