Allison Transmission 3200 SP User Manual

•Carriescontaminantstothelters
5.4RECOMMENDEDAUTOMATICTRANSMISSIONFLUIDS
OnlyuseuidsmeetingAllisonTransmissionspecicationTES295
®
,
TES668
TM
orTES389
®
inyourtransmission.Foralistofcurrently
approvedtransmissionuids,gototheAllisonTransmissionwebsiteat:
www.allisontransmission.com,selectSERVICE,Fluids.
AllisonTransmissionrecommendsyoutakethefollowingintoconsideration
whenselectingtheappropriateuidtypeforyourtransmission:
•FluidsmeetingspecicationTES295
®
orTES668
TM
arepreferred
overTES389
®
uidsforuseinall3000and4000Seriestransmission
applications.
•TES295
®
andTES668
TM
uidsarefullyqualiedforSevereDutyand
ExtendedDrainintervals.
•ATES295
®
andTES668
TM
uidallowsyoutooperateatalower
ambienttemperaturethanaTES389
®
typeuid.RefertoT able5–1.
•ATES389
®
uidistheminimumuidrequirementapprovedforusein
3000and4000Seriestransmissions.
•ToextendtheTES389
®
uiddrainintervalsbeyondtherecommended
mileageorhourschangeinterval,useauidanalysisprogram.Refer
to5.6FLUIDANALYSIS.
Whenchoosingauidtypetouse,considerwhattheminimum
uidoperatingtemperatureoftheuidwillbebasedontheambient
temperaturesreachedinthegeographicallocationforthevehicle.Refer
to3.3.1PreheatingRequirement.
Table5–1.TransmissionFluidMinimumOperating
TemperatureRequirements
MinimumOperatingConditions
FluidType
Celsius
Fahrenheit
TES295
®
orTES668
TM
–35–31
TES389
®
–25–13
81

Allison Transmission 3200 SP Specifications

General

Enclosure Rating	IP67
Input Voltage	12/24 VDC
Operating Temperature Range	-40°C to +85°C
Communication Protocol	SAE J1939
Memory	Flash and EEPROM
Diagnostic Capabilities	fault code logging
Dimensions	Varies by model
Weight	Varies by model
I/O	Digital and Analog Inputs/Outputs
Type	Transmission Electronic Control Unit (TECU)