MSR is mistakenly connected to your LAN, there will be faults. For standalone operation, choose an
IP address that differs from your setting used in the existing LAN and WLAN, e.g. an address in the
192.168.100.xxx range. See also: http://en.wikipedia.org/wiki/Private_IP address
• DHCP Server ModeDisabled / Enabled (Default = Disabled).
• IP address range startsThe automatic assignment of IP addresses starts with xxx.xxx.xxx.xxx.xxx.
Default = 192.168.0.110 • IP address range endsThe automatic assignment of IP addresses ends
with xxx.xxx.xxx.xxx.xxx. Default = 192.168.0.149
• Netmask Default = 255.255.255.0. Suitable for 192.168.xxx.xxx addresses.
• Gateway Not relevant in standalone operation. Otherwise your router address.
• DNS1 your DNS server address. For home networks the router address. In standalone operation
not relevant.
• DNS2 Not relevant in standalone operation.
• DNS3 Not relevant in standalone operation.
To Next Page
Loading...