Allnet ALL3419 - ALLNET Iot Cloud

ALLNET IoT Cloud
ALLNET IoT Cloud
ALLNET MSR goes IoT – MSR Quick Start Guide Before you can use the ALLNET MSR devices in the
ALLNET IoT Cloud, you must first install the ALLNET IoT module in the ALLNET MSR headquarters
and select which Sensors/actors in the ALLNET IoT Cloud should/may.
Step 1: Installation of the ALLNET IoT module in one/several ALLNET MSR headquarters.
Requirements:
Account at https://iot.allnet.de/en/register We do not recommend using this module with the
ALL3072 because the memory and performance are insufficient.
This module sends data and responds via the secure MQTT protocol and the German-based server of
ALLNET.
Open the browser of your MSR center and click on the tab "Module" "Module Management"1.
Install the current ALLNET IoT cloud module in which you click on the "+"2.