11
http://www.alltraxinc.com
Fuse
Controller Amperage Fuse Style / Rating
650A ANN / 400A
750A
FUSE
NUT
LOCK WASHER
FLAT WASHER
BOLT
WIRE LUG
Diagram: Fuse terminal hardware
Any application where there is a battery pack, a fuse must be
installed. A fuse will open the battery circuit and prevent any
serious damage from occurring.
The fuse should be installed on or between the battery terminals.
The main battery positive OR main battery negative OR in-
between 2 batteries is an acceptable location for fuse installation.
The fuse must be rated for pack voltage and fault current.
To Next Page
Loading...
