Alltrax AC1 - Wire Harness Pinouts; Speed and Temp Sensor Connectors; Controller Side Connector

18
AC OPERATORS MANUAL
Wire Harness Pinouts
Speed and Temp sensor harness connectors
Used on all DC conversions
C3 - TE_Superseal 4P connector
used for the speed sensor signal of the
motor. Water resistant connector.
C2 - TE_Superseal 2P connector used
for the motor temp sensor harness.
Water resistant connector.
C1 - JST-JWPF O8 connector used
for the controller side connection of
the Speed and Temp sensor harness.
Water resistant connector.