Alltrax AC1 - PDS Pinout Table; PDS Connector Pin Details

23
http://www.alltraxinc.com
PDS PINOUT TABLE
PIN NAME DESCRIPTION
** C1 CONNECTOR
1
FnR Feed Output from controller to FnR switch
2
Reverse Reverse input from FnR switch
3
Forward Forward input from the FnR switch
4
Reedswitch Logic The reedswitch supplies logic power
when the charger is disconnected.
5
Logic Battery reference voltage
6
Solenoid Neg Lo side logic for controlling solenoid
7
Solenoid Pos Hi side logic for controlling solenoid
8
KSI logic Logic signal from key to controller
9
KSI Signal feed from controller to key
10
Horn Control signal for reverse buzzer
** C3 CONNECTOR
1
Logic Input Reference voltage from controller
2
KSI Logic Logic input for keyswitch
3
Logic Input Reference voltage from controller
4
Tow/Run Tow/Run reference
** C4 CONNECTOR
1
FS OUT Footswitch signal output
2
FS IN Footswitch singal input
3
ITS throttle Throttle reference
4
ITS throttle Throttle signal