20
Series AE1L, AE.E, AE.N, AE.H, AE.V, AED1E, AED2N
Design ID, ZD
gon nuts (609). Tighten the hexagon screws
evenly.
! Tighten the hexagon nuts (613).
7.3 Replacement parts/spare parts
All stated pumps with the different shaft seal and
bearing designs are portrayed in the following sec-
tional drawings with parts list. The replacement
parts/spare parts are listed in the parts list.
Recommended replacement parts/spare parts:
R = large repair set
r = small repair set
For reasons of operational safety, you may only stock
and install original replacement parts supplied by us.
In this context, we refer to the statements in Chapter
2.7.
When ordering replacement parts/spare parts, state
the following:
Machine number
Abbreviation of the pump
Part number
Denomination and part quantity
or Ident No. and quantity
Note: The machine number and abbreviation of the
pump is embossed on the type plate.
The identity number and quantity are indicated in the
enclosed separate replacement parts list.
To Next Page
Loading...
