Appendix
9.5 Declaration of conformity according
to EC Machine Directive
The following declaration does not contain serial numbers
or signatures. The original declaration is delivered with the
respective pump.
Declaration of conformity
EC declaration of conformity according to
machine directive, appendix II A
We,
ALLWEILER GmbH, Postfach 1140, 78301 Radolfzell, Germany; Tel. +49 (0)7732 86-0, Fax. +49 (0)7732 86-436
hereby declare that the pump unit/pump:
Designation NT
Equipment no.
Order no.
– when the conditions in the operating instructions are observed – complies with the following applicable EC directives:
• Machine Directive (2006/42/EC)
• The protection targets of the low-voltage directive (2006/95/EC, valid until 19 April 2016, and 2014/35/EU, valid from
20 April 2016) were compiled according to appendix I no. 1.5.1 of the machine directive 2006/42/EC.
Applicable harmonized norms:
• EN 809:1998 + A1:2009 + AC:2010
• EN ISO 12100:2010
Responsible for the documentation ALLWEILER GmbH
Allweilerstraße 1
78315 Radolfzell
Date: 02.10.2015
Company stamp / signature:
Head of Development/Construction
Tab. 29 Declaration of conformity accordin
gtoECMachineDirective
50 NT series BA-2021.04 en-US 161-295/E
To Next Page