Phone Guide – 9212
7.3 Preferences
1. Press the CONFIG soft key button.
2. Press the Down arrow button to select Preferences. Press the Select button
.
3. Select from the following list using the Up / Down navigation arrows to make the changes:
a.
LCD Contrast – Controls the contrast of the display. Use the Volume bar or Up / Down navigation
arrows to adjust.
b.
Call History Size – Number of calls kept in History. 0 – 99 (Default: 99).
c.
Clock Mode – Time Display for LCD Screen.
i. Off
ii. 12 Hour (Default)
iii. 24 Hour
d.
Hold Reminder Mode – How the hold reminder should act.
i. No Reminder
ii. On Hook
iii. Timer (Default)
iv. On Hook and Timer
e.
Redial Memory – To have the last number dialed stored in the phone.
i. Enabled (Default)
ii. Disabled
iii. Timed
f.
Audible Dialing – Tones are heard when a key is pressed.
i. Enabled (Default)
ii. Disabled
g.
Call Timer Display – Displays the length of time during a call.
i. Enabled (Default)
ii. Disabled
h.
Intercom Auto Answer – When a call is placed to a phone using the INTERCOM button, the phone
receiving the call will automatically answer using Intercom/Speakerphone.
i. Enabled (Default)
ii. Disabled
i.
On Hook Dialing – Speaker mode will be enabled when a number on the keypad is pressed. Allows
numbers to be dialed without pressing the SPEAKER button first.
i. Enabled (Default)
300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com
© 2008 Allworx. All rights reserved
Revised: May 28, 2008
Page 19
To Next Page
Loading...
