Allworx 9212 - Save Changes to Your Settings; Reset the Phone to Its Factory Defaults

Phone Guide – 9212
- Bad Address
- Refused Busy
5. Use the Up / Down navigation arrows to move through the list.
6. When finished, press the EXIT soft key.
7.10 Save Changes to Your Settings
Normally, you are prompted to save the changes you have made. You may, however, manually want to save
the changes.
1. Select the soft key that corresponds to CONFIG on the screen.
2. Highlight Save Settings.
3. Press the Select button
.
4. Select the YES soft key to save any changes OR select NO to cancel changes made.
5. Press the EXIT soft key.
7.11 Reset the Phone to Its Factory Defaults
Warning: Do not reset your phone to its factory defaults unless instructed by your System
Administrator.
1. Select the soft key that corresponds to CONFIG on the screen.
2. Highlight Set Factory Defaults.
3. Press the Select button
.
4. Select the YES soft key to restore the factory defaults OR select NO to keep the Configuration as is.
5. Phone automatically reboots.
300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com
© 2008 Allworx. All rights reserved
Revised: May 28, 2008
Page 24