ALMAC MULTI-LOADER 6.0 - Page 113

PAGE 113 ALMAC s.r.l.
Type of inspection
Description
Checking and tightening screws, bolts, plug
ring nuts
Date
Observations
Signature
1st year
2nd year
3rd year
4th year
5th year
6th year
7th year
8th year
9th year
10th
year
NOTE: frequency of the operation as indicated in the table in Chapter 6. Daily registration is not
necessary, but should be made at least once a year when other operations are performed.
Type of inspection
Description
Visual and structural inspection
Check the integrity of the anchors, supports,
carpentry, welding and pins
Date
Observations
Signature
1st year
2nd year
3rd year
4th year
5th year
6th year
7th year
8th year
9th year
10th year
NOTE: frequency of the operation as indicated in the table in Chapter 6. Daily registration is not
necessary, but should be made at least once a year when other operations are performed.