PAGE 63 ALMAC s.r.l.
4.2.3.1 Automatic levelling
The machine always remains level during translation.
To activate this mode, it is necessary to move the selector (8) of the push-
button panel to the "DYNAMIC LEVELING ON" position and the selector (6) to the
"DRIVE MODALITY" or "ED-S" position.
The system will bring the frame back to an inclination of less than 0.5°
compared to the horizontal.
4.2.3.2 Manual levelling
By activating any movement, the platform will stop automatically once it
reaches the horizontal.
Warning: manual levelling is less accurate than automatic levelling.
To Next Page
Loading...
