ALMAC MULTI-LOADER 6.0 - Machine Operation

PAGE 55 ALMAC s.r.l.
4.2 Machine operation
4.2.1 Powering of the machine.
To turn the machine on, it is necessary to reset all the emergency mushroom
buttons (side, ground panel and console) and to turn the key selector located in
the ground controls to position 1;
The key-switch functions are:
• (RIGHT POSITION – 1): machine on - energised electrical system.
• (LEFT POSITION SX - 0): machine off - de-energised electrical system.
To turn on the machine proceed as follows:
1. Press button to switch on the radio control (after releasing all the emergency
mushrooms);
2. Press the button again to activate the machine power supply (s);