PAGE 16 ALMAC s.r.l.
2.2.2 Meanings of the sign pictograms
Warning / Danger. This symbol means that you must take care or
that danger is present. Failure to comply with this alert indication
could cause damage to the machine, the operator or exposed
persons.
Warning. This symbol means that you must take care of hot parts
that could cause burns. Do not touch.
Warning. This symbol means that you must take care of an electric
panel or other live electrical devices.
Danger. This symbol means that there is a danger of injury to the
upper and lower limbs due to moving parts. Do not insert your hands
or feet into openings that could move and cut or between moving
parts.
Forbidden. Means that it is forbidden to use water at high pressure
on these surfaces
Forbidden. Means that it is forbidden to climb onto the parts
indicated by this symbol.
Required. This symbol means that you must use the indicated
anchor points for lifting the machine.
Required. This symbol means that you must comply with the
instructions in the “use and maintenance manual”.
To Next Page
Loading...
