ALMAC MULTI-LOADER 6.0 - Page 40

PAGE 40 ALMAC s.r.l.
No.
Identification
Function and Status
Description of the function
1
Button (START)
ENGINE IGNITION AND AUTOMATIC LEVELLING
Ignition of machine and
console
1. Press the button to access
the radio control (after
releasing the emergency
mushroom);
2. Press the button again to
activate the machine power
supply;
3. When the machine is turned
on it acts as an acoustic
signal.
2
Selector
ELECTRIC MOTOR SELECTION
ELC
BATTERY
position
Powering of electric motor DC
48V.
To switch on the electric
motor, press the button (1)
located on the left side of the
console.
EVO
ENGINE
position
Endothermic Engine.
- Activate the glow plug
preheating by keeping the
button (5) pressed for at least
10 sec.
- Press the button (1) located
on the left side of the console
to start the engine
(To switch off the internal
combustion engine, turn the
selector downwards)