SPC 20 OPERATOR’S MANUAL
B-8 SAFETY
STAY CLEAR OF HEADER
Rotating knives, gathering belts, conveyor
belts of row crop head, etc., cannot be
completely shielded due to their function.
Stay clear of these moving parts during
operation.
Always disengage header drive, shut off
engine, and remove key before servicing or
unclogging header.
STAY CLEAR OF AUGER
The auger located inside the grain tank
cannot be completely shielded against
accidental contact. Use a rod to clear
blockages. Never use hands or feet to clear
blockages or take samples. Never enter
grain tank while engine is running.
OPERATING THE ENGINE
Never operate the engine in an enclosed
building.
Make sure the ground drive lever is in
neutral, the clutch and head switches are
off, and the brake is on before starting
engine.
TRANSPORTING EQUIPMENT
Make sure all equipment is in the
travel/transport position.
Fold or stow components so equipment is
within legal travel height and width to avoid
damage to equipment and/or severe
electrical shock to the operator.
To Next Page
Loading...