Almaco SPC 20 - Forward

SPC 20 OPERATOR’S MANUAL
SPECIFICATIONS G3
SPECIFICATIONS
FLUID AND CAPACITIES
Engine Oil: 15W-40 class CC/SE or CD/SE Engine Capacity (w/filter): 7.5 qt
Hydraulic Oil: Dexron II or compatible Hydraulic Tank Capacity: 15 gal
Fuel: Diesel (sulfur content less than 5%) Fuel Tank Capacity: 25 gallon
SHAFT SPEEDS
Engine: Preset at Factory Threshing Cylinder Shaft: 0-1000 RPM
Jack Shaft: 725-750 RPM Strawpuller: 215 RPM
Shaker: 190-220 RPM Internal Conveyor: 200 RPM
Cyclone Blower Shaft: 3000 - 3500 RPM Winnowing Blower Shaft: 1000-1600 RPM
ENGINE:
Mfg/Typ: Duetz TD2011L04i EPA Tier 3 Max. Torque: 177 lb-ft (240Nm) @ 1700 RPM
4 cyl. Turbo-charged air-cooled diesel Max. Output: 72 hp (54kW) @ 2600 RPM
GROUND DRIVE
Forward/Reverse: Hydrostatic Options: Rear Wheel Assist
Ground Speed: 0-6 mph
TIRES
Front: 11.2-24 6ply Rear: 8.5L-14 6ply
Options may modify tire sizes
THRESHING CYLINDER
Type: Closed metal rasp bar Diameter: 15.25”
Speed: 0-850 (0-1250 opt) Number of Bars: 8
Width: 31.5” Control: Hydraulic
CONCAVE
Style: Under-slung Open Grate Adjustment: Worm Gear Driven, Rear Hinged
SHAKER PAN / SIEVES
Stroke Length: 3” Sieve type: Aluminum Graepel
Opening Size (mm): 6,8,10,14,16,18,20,22,32
Upper Sieve Dimensions: 30” x 55” Upper Sieve Area: 1650 in
2
Lower Sieve Dimensions: 30” x 47.5” Lower Sieve Area: 1425 in
2
STRAWPULLER
Diameter: 8” Speed: 215 RPM
WINNOWING BLOWER
Type: Forward Curved Radial Impeller Diameter: 10-5/8” (27cm)
Volume Control: Shutter Door Speed Control: Variable Pitch Sheave