SPC 20 OPERATOR’S MANUAL
MAINTENANCE E-5
DAILY MAINTENACE CHECKLIST
Before starting and operating the combine complete the Daily Maintenance Checklist.
1. Check safety equipment.
2. Lubricate cyclone bearings, 1 pump only.
3.
Lubricate winnowing blower bearings, 1 pump only.
4.
Check air filter indicator, clean filter if required.
5.
Check engine oil level, check for leaks.
6.
Check hydraulic oil level, check for leaks.
7.
Remove plant material from head and combine.
SERVICE RECORD
DATE SERVICE PERFORMED
To Next Page
Loading...