EasyManua.ls Logo

Alpha-InnoTec L12 SPLIT - Page 54

Alpha-InnoTec L12 SPLIT
112 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9.0 [S] Service menus
9.3.10.2 [S] Period time 1
9.3.10.3 [S] Temp. period 1
9.3.10.4 [S] Period time 2
9.3.10.5 [S] Temp. period 2
9.3.10.6 [S] Return
9.3.11 [S] Supply pump exer.
9.3.12 [S] Supply diff HP
9.3.13 [S] Diff HP add. heat
9.3.14 [S] Block HW/Heating
9.3.15 [S] Heat drop at alarm
9.3.16 [S] Type of HW sensor
9.3.17 [S] Freeze protection HX
9.3.18 [S] Return
9.4 [S] Quick start
9.5.1 [S] Heat pump type9.5.0 [S] System info
9.5.2 [S] Cpu usage percent
9.5.3 [S] Com rate/1000
9.5.4 [S] Unit w. com. problem
9.5.5 [S] Run time add. heat
9.5.6 [S] Run time hot water
9.5.7 [S] Program version
9.5.8 [S] 106-card version
9.5.9 [S] Display version
9.5.10 [S] Relay card version
9.5.11 [S] Lowest supply temp.
9.5.12 [S] Percent runtime
9.5.13 [S] Period
9.5.14 [S] Run status
9.5.15 [S] Run status last
9.5.16 [S] Run status time
9.5.17 [S] Return
9.6.1 [S] CompFreq9.6.0 [S] Heat reg. settings
9.6.2 [S] Manual CompFreq
9.6.3 [S] Max deltaF act/set
9.6.4 [S] CompFreq regP
9.6.5 [S] Time min freq start
9.6.6 [S] Time min freq heat
9.6.7 [S] Max diff flow-cFlow
9.6.8 [S] CompFreq GMz
9.6.9 [S] Return
9.7 [S] Reset alarm
9.8.x.1 [S] Time9.8.1.0 [S] Log 19.8.0 [S] Alarm log
9.8.x.2 [S] Alarm type
9.8.x.3 [S] Run status
9.8.x.4 [S] Run status last
9.8.x.5 [S] Run status time
9.8.x.6 [S] Run time compressor
9.8.x.7 [S] Outdoor avg. 1min.
SPLIT50
Miscellaneous
Control

Table of Contents

Related product manuals