Alpha-InnoTec L12 SPLIT - Comfort Setting Hot Water; Available Volume; Prioritizing; Extra Hot Water

Comfort setting hot water
The water heaters are coil models and are heated by circu-
lating water, which is heated by the heat pump.
During “normal” consumption it is enough to run the heat
pump’s compressor to supply the different tapping points
of the house with hot water. The temperature of the hot
water in the water heater then varies between the set
values.
Under section 1.0 [N] Hot water temp. on page 53 there
is a complete description of menu settings for hot water
temperatures.
Available volume
300
350
48 50 52 54 56 58 60 62 64
Tappvarmvarmvattenvolym, 40 °C [l]
Stopptemperatur varmvarmvatten [°C]
0
50
100
150
200
250
HEV 300 AMS 10-8
10 l/min
12 l/min
14 l/min
16 l/min
Domestic hot water volume, 40 °C (litre)
Stop temperature hot water °C
10 l/ min
12 l/ min
14 l/ min
16 l/ min
300
350
48 50 52 54 56 58 60 62 64
Tappvarmvarmvattenvolym, 40 °C [l]
Stopptemperatur varmvarmvatten [°C]
0
50
100
150
200
250
HEV 300 AMS 10-12
10 l/min
12 l/min
14 l/min
16 l/min
Domestic hot water volume, 40 °C (litre)
Stop temperature hot water °C
10 l/ min
12 l/ min
14 l/ min
16 l/ min
0
100
200
300
400
500
600
48
50 52 54 56 58 60 62 64
Tappvarmvarmvattenvolym, 40 °C [l]
Stopptemperatur varmvarmvatten [°C]
HEV 500 AMS10-8
10 l/min
12 l/min
14 l/min
16 l/min
Domestic hot water volume, 40 °C (litre)
10 l/ min
12 l/ min
14 l/ min
16 l/ min
Stop temperature hot water °C
0
100
200
300
400
500
600
48
50 52 54 56 58 60 62 64
Tappvarmvarmvattenvolym, 40 °C [l]
Stopptemperatur varmvarmvatten [°C]
HEV 500 AMS10-12
10 l/min
12 l/min
14 l/min
16 l/min
Domestic hot water volume, 40 °C (litre)
Stop temperature hot water °C
10 l/ min
12 l/ min
14 l/ min
16 l/ min
Prioritizing
If the water within the water heater requires heating, the
heat pump prioritises this and shifts to hot water mode
with the entire heat pump output.
In this mode, there is no heating or cooling.
Prioritizing can be affected via settings in the front panel.
See "1.0 [N] Hot water temp." on page 53.
Extra Hot Water
In all ”Extra hot water” functions, the temperature of the
hot water increases temporarily. The temperature is first
increased to an adjustable level by the compressor (menu
1.5) and then the electric additional heat increases until
the stop temperature is reached (menu 1.4).
Temporary ”Extra hot water” is activated manually, whilst
time based extra hot water is activated using the settings
made in the control computer.
When:
■
”A” appears above the
A BI II III I II
13.43
1.0
A
5 0 . 0 ° C
icon, temporary extra hot
water is active.
■
””B” appears above the
A BI II III I II
13.43
1.0
A
5 0 . 0 ° C
icon, when time based extra
hot water is active.
SPLIT12
For Home Owners
Comfort setting hot water