EasyManuals Logo

Alpha-InnoTec LWD Series User Manual

Alpha-InnoTec LWD Series
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
4
Subject to change without notice | 83053500oUK | ait-deutschland GmbH
1.4 Contact
Addresses for purchasing accessories, for service
cases or for answers to questions about the device
and this operating manual can be found on the internet
and are kept up-to-date:
Germany: www.alpha-innotec.de
EU: www.alpha-innotec.com
2 Safety
Only use the device if it is in perfect technical condi-
tion and only use it as intended, safely and aware of
the hazards and under full observance of this operation
manual.
2.1 Proper use
The device is designed for domestic use and intended
exclusively for the following functions:
Heating
Domestic hot water preparation (optional, with
accessories)
Cooling (reversible devices only)
Proper use includes complying with the operating
conditions ( Technical data / scope of sup-
ply, from page 17) and the operation manual
and observing the reference documents.
When using the device, observe local regulations:
laws, standards and directives.
Any other use of the device shall be considered im-
proper use.
2.2 Personnel qualifications
The operating manuals supplied with the product are
intended for all users of the product.
The operation of the product via the heating and heat
pump control and work on the product which is intend-
ed for end customers / operators is suitable for all age
groups of persons who are able to understand the ac-
tivities and the resulting consequences and can carry
out the necessary activities.
Children and adults who are not experienced in han-
dling the product and do not understand the neces-
sary activities and the resulting consequences must
be instructed and, if necessary, supervised by persons
experienced in handling the product and who are re-
sponsible for safety.
Children must not play with the product.
The product may only be opened by qualified personnel.
All procedural instructions in this operating manual are
solely directed at qualified specialist personnel.
Only qualified, skilled personnel is able to carry out
the work on the unit safety and correctly. Interference
by unqualified personnel can cause life-threatening
injuries and damage to property.
Ensure that the personnel is familiar with the local
regulations, especially those on safe and hazard-
aware working.
Ensure that the personnel are qualified to handle
flammable (primary) refrigerant.
Work on the refrigerating circuit may only be car-
ried out by qualified personnel with appropriate
qualifications for refrigeration system installation.
Work on the electrics and electronics may only be
carried out by electrical technicians.
Any other work on the system may only be car-
ried out by qualified personnel (heating installer,
plumbing installer).
During the warranty and guarantee period, servicing
and repair work may only be carried out by personnel
authorised by the manufacturer.
2.3 Personal protective equipment
During transport and work on the unit, there is a risk of
cuts due to the sharp edges of the unit.
Wear cut-resistant protective gloves.
During transport and work on the unit, there is a risk of
foot injuries.
Wear safety shoes.
When working on liquid-conveying lines, there is a risk
of injury to the eyes due to leakage of liquids.
Wear safety goggles.
2.4 Residual risks
Injuries caused by electric current
Components in the device are live with fatal voltage.
Before working on the unit:
Disconnect the device from the power supply.
Protect the device against being switched back on
again.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Alpha-InnoTec LWD Series and is the answer not in the manual?

Alpha-InnoTec LWD Series Specifications

General IconGeneral
BrandAlpha-InnoTec
ModelLWD Series
CategoryHeat Pump
LanguageEnglish

Related product manuals