We reserve the right to modify technical specifications without prior notice.
UK830501/200520 © Alpha-InnoTec GmbH
Overow valve
INSPECTING AND SETTING UP THE OVERFLOW VALVE
N
he maximum return ow tem
…
With the heating curve set low, switch the system
ake sure that the volume ow is channeled 100
ead the forward ow and return ow tem
the heating and heat pump
regu
knob of the overow valve until
the tem
lockwise = increases spread
Installation of the control
element
DAN
Before opening the unit, disconnect the
switched back on!
Situated at different hei
hts in the front facade of the
unit are recesses
4 hooks are located on the back side of the control
lement and can be used to hang the control element on