Alpine 35278 - Typical System Connections: 2-Channel Operation-A

SWITCH SETTINGS
INPUT MODE FILTER INPUT CHANNEL ACOUSTIC COMPENSATION
Go| Ge)
CH 2 Prof errs
brn! OFF HP LP
CHOX(MONO)
ST
CHi}+12}
Fin
Reng
eae
Cal
a 24
i] fa] De Ba Oe OFF = ON
CH 3/4 eo
mit OFF HP LP | OFF HP LP
CHEIMONO) ST CHEK} ~ cui pange Satellites
(+)
| CH 3/4
(Right)
=) Speaker
Extension
Cable
» Battery (+) Lead
f= Ground Lead
Speaker :
H Input :
: Leads ‘
Apa” Sie a CH 4(4)(White) Ill CH 3(-)(Green/Black)
a ;
CH 1(-)(White/Black) ||I{ CH 3(+)(Green) :
Note: Do Not Use CH 2(+)
(Gray), CH 2(-) (Gray/Black),
CH 4(+) (Violet) and CH 4(-)
(Violet/Black).
Insulate Exposed Conductors
Remote
Turn-On or
Head Unit with
Speaker Outputs Only ®* | Power Antenna ;
ne heheen tus acercenscsssepcesttessvageawenescentectedsneeacase- Sena? ! SS
1 Processor] | Remote _ ese
Head Unit or Signal Processor
With Pre-Amp
Outputs ® *
Turn-On or
Power Antenna ! Remote Turn-On Lead
Notes: * Use Connection ® or ® , But Never Both.
** +12V Should be Supplied to this Terminal to Turn the 3527S On.
** Extension Cables are Sold Separately.
16